Sanyo vcc-zm300p instruction manual Password setting, ¤¤¤, Password screen will appear

PRIVACY MASK SETTING (PRIVACY MASK)

PASSWORD setting

You can lock the privacy masks in place as gray patterns after they have been set. The password requirement is initially set to OFF, but to begin using it, you must enter the factory set password “1234”.

English

1	PRIVACY	MASK SETTING		PASSWORD
	PASSWORD	LOCK	OFF ‚
	PASSWORD	CHANGE	SET ‚
	MASK SET		SET ‚	¤¤¤¤	SET ‚
				-

3	PASSWORD	PRIVACY	MASK SETTING
		PASSWORD	LOCK	OFF ‚
		PASSWORD	CHANGE	SET ‚
		MASK SET		SET ‚
	1234	SET ‚
	-

OK

MENU BACK MENU BACK MENU BACK MENU BACK

1

2

Use the cursor button (j or l) to move the cursor to

OFF for PASSWORD LOCK in the PRIVACY MASK SETTING screen. Then press the SET button.

The PASSWORD screen will appear.

Enter the factory set password “1234”.

Use the cursor button (j or l) to select “1”, then use the cursor button (c).

To move the cursor to the next “*” digit.

3Use the same steps to enter “2,” “3,” and “4,” then press the SET button.

“OK” will appear and BACK for MENU will be blinking. Press the SET button again. The PRIVACY MASK SETTING screen will reappear and “ON” will be blinking for PASSWORD LOCK.

Note: If a different password is required, “NG” will appear. Please carefully maintain the password so that it will not be forgotten.

1¤¤¤

15