Specifications, Electronic zoom | Sanyo vcc-zm300p guide

SPECIFICATIONS

English

Pickup device	:	1/4"
Effective pixels	:	752 (H) x 582 (V)
Horizontal resolution	:	Over 520 TV lines
Lens	:	22 power zoom lens, f=4.0 – 8.8mm (F1.6 –
		3.8)
		Electronic zoom and gearing
		Zoom speed setting possible
Electronic zoom	:	16 power (combined with optic zoom gives
		352 power max)
		Max zoom magnification setting possible
		Vertical resolution ON/OFF setting
Autofocus	:	AUTO/MANUAL
		AF area setting possible (3 step)
Iris control	:	AUTO/MANUAL, 1/2 EV steps
Synchronization method	:	Internal synchronization/Line lock,
		V phase adjustment possible

Lowest image illumination : 2.0 lx (F1.6) at max AGC gain

0.06lx (F1.6) at x32 electronic sensitivity boost

Motion detector	:	ON/OFF, ON allows setting of detection
		patterns on a 48 zone screen for 6 motion
		settings (size, masking, sensitivity, zoom,
		interval, alarm sign)
Privacy masking	:	ON/OFF, max of 4 masked locations
		Password lock possible
Alarm input/output
(back panel control	:
terminals)	:	Alarm input: 1 (for external alarm switch)
		Alarm output: 1 (for sending a signal to the
		system controller or an alarm detection
		device such as a buzzer)
Mirror image effect	:	Horizontally (H), vertically (V), horizontally
		and vertically (HV)
Camera ID	:	ON/OFF, 16 characters
View settings	:	9 (0 – 8) screen files can be established, and
		each file can set 7 capturing characteristics
		such as iris
Communications	:	Coaxial control, RS-485
Operational

S/N

Backlight compensation

Electronic shutter

:Over 48dB

:Multi-spot evaluative metering

5 spot centerweighted average metering

48 multi-spot metering

:• Fast shutter speed mode (SHORT); 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

•Slow shutter speed mode (LONG); x1, x2, x4, x8, x16, x32

temperature/humidity	:	–10 – 50° C/below 90% RH
Power source	:	24 V AC, 50 Hz/12 V DC
Power consumption	:	4.5 W
Weight	:	380 g

Electronic sensitivity	:
boosting	:	AUTO/OFF, works with auto iris
		Up to x32 max setting possible
White balance	:	ATW/AWC/MWB
AGC gain	: ON allows selection of ±0dB, +6dB, +9dB, –6dB
		OFF allows manual adjustment from 0dB to
		30dB

53

Image 54

Sanyo vcc-zm300p instruction manual Specifications, Electronic zoom

Contents

VCC-ZM300P Propos de ce manuel Contents Main Features Accessories Precautions Parts Names and Functions Parts Names and Functions AC 24 V connection Power supply choicesConnections DC 12 V connection Connections Coaxial cable type and maximum length Sub-menu screen Setting to ON, then press the SET buttonDISPLAYING/CLOSING the Menu Screen Cursor button SET button Menu Item Flow and Menu Operation Language Setting Language screen will appearInterface language becomes French ID CAM 1 ???????????? Camera ID SettingCamera ID setting Example Setting the Camera ID to CAM Camera ID screen Sync Setting Sync Camera ID SettingPower source synchronization L-L setting Use the cursor button j or l to select SET for Privacy Mask Setting Privacy MaskMask setting SET button Privacy Mask Setting Privacy Mask About the Position screen ¤¤¤ Password settingPassword screen will appear To move the cursor to the next * digit For use when Password Lock is on Password Lock cancellationPassword changes Password NEW Password screen will appear Lens Setting Lens Focus settingSetting the manual focus Manu Lens Setting Lens Setting the autofocus AutoHigh High sensitivity focusing LOW Low sensitivity focusing Button EL Zoom Electronic zoom magnification setting Zoom settingZoom Setting screen will appear Available settings OFF, x2, x4, x8, x16 16 power Mirror Setting Iris Auto item Sense UP activatedOFF Normal image View Setting Item Flow View Setting Item Flow About creating image setting files in View SettingFunction is set View Setting Iris settingAutoiris setting Auto View Setting BLC Setting screen will appear BLC Setting Position screen will appear BLC Setting Size screen will appearBLC Window Weighting screen will appear Example of setting the mask in the center weighting position Use the cursor button j l d c to move the cursor to Then press the SET button Sense UP setting Level setting Available settings OFF, x2, x4, x8, x16 Manual iris setting Iris Setting screen will appearSets electronic iris ON/OFF, lens aperture and iris level Available methods ATW Auto trace white balance White Balance adjustmentView Setting 1 screen will appear AWC One-push automatic white balance White balance additional settings MWB setting White balance additional settings ATW settingMWB Setting screen will appear Use the same steps to place addition masks as needed White balance additional settings AWC setting Electronic Shutter setting Fast shutter speed Short mode settingAvailable settings 50, 120, 250, 500, 1000, 2000, 4000 Slow shutter speed Long mode setting Iris Auto item Sense UP activated or Manu item El on Select ON. Then press the SET button Motion detector settingMotion Setting screen will appear and SET for Size will Blinking V1, H2 V1, H1V2, H2 V2, H1 Motion Masking setting Finishing motion pattern settingPattern Detected motion confirmation mode Demo Sensitivity settingWhen necessary, adjust the following settings Sensitivity screen will appear Interval setting This item is set in the Motion Setting screen Alarm Sign setting Set the horizontal profile compensation Profile compensation setting ApertureVertical directions Set the vertical profile compensation Automatic gain control AGC setting Sets AGC to on or OFF and adjusts the gainGain Setting screen will appear, and 0dB will be blinking Gamma correction setting RS-485 Setting screen will appear Option SettingControl setting Available settings 19200, 9600, 4800 Option Setting Alarm setting Alarm input setting AlarmAddress setting OFF Does not output a motion sensor alarm Motion sensor input setting MotionAlarm duration setting Duration Set the duration for the following alarm input reception Alarm output setting Alarm OUT Option Setting Menu Flow See Menu Flow Specifications Electronic zoom Specifications Dimensions