VIEW SETTING
English
3
ATW MASKING
CONTINUE (ñ)
ATW MASKING
CONTINUE (ñ)
4 | ATW SETTING | 5 | |
| MASKING | ON | ‚ |
| SMART ATW | OFF |
|
| PRESET | OFF |
|
| MENU | BACK |
|
ATW SETTING
MASKING | ON | ‚ |
SMART ATW | ON |
|
PRESET | OFF | |
MENU | BACK | |
3Use the cursor button (j l d c) to move the mask pattern over the bright light source, then press the SET button.
Use the same steps to place addition masks as needed.
Note: Initial settings place no masks on the screen. To cancel the placement of masks, press the SET button again.
4Use the cursor button (j or l) to move a mask pattern to the bottom area of the screen and continue holding the cursor button straight down for 3 seconds.
The PRESET and MENU items will appear on the screen. Use the cursor button (j or l) to select BACK, then press the SET button. The ATW SETTING screen will reappear.
☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.
☞SMART ATW setting
If saturation is high or a scene is bright, the most suitable colors may not be obtained. In this case, set the SMART ATW to ON.
5Use the cursor button (j or l) to move the cursor to SMART ATW, then use the cursor button (d or c) to set
ON.
☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.
33
