Sanyo vcc-zm300p instruction manual Option Setting, CONTROL setting, English

OPTION SETTING

1	MAIN MENU		2
	LANGUAGE	SET	‚
	CAMERA ID	OFF
	SYNC	INT
	PRIVACY MASK	SET	‚
	LENS	SET	‚
	MIRROR	OFF
	VIEW SETTING	1	‚
	OPTION	SET	‚

OPTION

CONTROL	485	‚
ADDRESS	0
ALARM	SET	‚

3RS-485 SETTING

BAUD RATE 19200

TERMINATE OFF

4RS-485 SETTING

BAUD RATE	19200
TERMINATE	OFF

English

CONTROL setting

1Use the cursor button (j or l) to move the cursor to

OPTION, then press the SET button. The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION settings are in use.

2Use the cursor button (j or l) to move the cursor to 485 for CONTROL, use the cursor button (d or c) to select the device to be operated (Ex: 485), and then press the SET button.

The RS-485 SETTING screen will appear.

Available settings:

•485: For operation by the System Controller

•COAX: For operation of device by linked coax cable.

3Use the cursor button (d or c) to select 19200 for BAUD

RATE.

Available settings: 19200, 9600, 4800, 2400

4Use the cursor button (j or l) to move the cursor to TERMINATE, and then use the cursor button (d or c) to select the terminate setting.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

46