Sanyo vcc-zm300p Sync Setting Sync, Camera Id Setting, Power source synchronization L-Lsetting

CAMERA ID SETTING

4Use the cursor button (j or l) to move the cursor to

POSITION, and then press the SET button. The camera ID will be displayed on one line.

SYNC SETTING (SYNC)

Initial setting is internal synchronization (INT), so it does not need to be set again. Follow the steps below to change the setting to power source synchronization (L-L).

CAMERA ID SETTING

CAM1

Power source synchronization (L-L) setting

ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 :-‚

ID CAM1????????????

POSITION	SET	‚
PRESET	OFF
MENU	BACK

Camera ID

1MAIN MENU

LANGUAGE	SET	‚
CAMERA ID	OFF
SYNC	INT
PRIVACY MASK	SET	‚
LENS	SET	‚
MIRROR	OFF

2L-L SETTING (V SYNC PHASE)

ú------ +------ ü 0

English

(Displaying the ID on 2 lines.)

1Use the cursor button (d or c) to move the cursor to the location in the ID field where the carriage return is wanted.

VIEW SETTING	1	‚
OPTION	SET	‚
PRESET	OFF
MENU	END

PRESET	OFF
MENU	BACK

2Use the cursor button (j l d c) to move the cursor to the carriage return mark (y) at the lower right corner of the character selection palette, and then press the SET button.

5Moving the on-screen title display position

Use the cursor button (j l d c) to move the title display to the preferred position on the screen, then press the SET button.

The CAMERA ID SETTING screen will reappear.

1Use the cursor button (j l d c) to select L-L for

SYNC, then press the SET button. The L-L SETTING screen will appear.

2Use the cursor button (d or c) to adjust the position of the vertical synchronization indicator shown on the screen.

The numerical value will change, allowing adjustment of vertical synchronization.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

12