Sanyo vcc-zm300p Automatic gain control AGC setting, Sets AGC to on or OFF and adjusts the gain

VIEW SETTING

FAutomatic gain control (AGC) setting

Sets AGC to ON or OFF and adjusts the gain.

1MAIN MENU

LANGUAGE	SET	‚
CAMERA ID	OFF
SYNC	INT
PRIVACY MASK	SET	‚
LENS	SET	‚
MIRROR	OFF
VIEW SETTING	1	‚

2VIEW SETTING 1

IRIS	AUTO ‚
WHITE BALANCE	ATW	‚
SHUTTER	LONG ‚
MOTION	OFF
APERTURE	ON	‚
AGC	ON	‚
GAMMA	ON

(When ON is set)		(When OFF is set)
GAIN SETTING		GAIN SETTING
MAX GAIN	±0·
DNR	OFF

ú------+------ü 0·

English

1Use the cursor button (j or l) to move the cursor to

VIEW SETTING, then press the SET button. (Ex: 1) The VIEW SETTING 1 screen will appear.

2Use the cursor button (j or l) to move the cursor to AGC, and then use the cursor button (d or c) to select the compensation level.

Available settings:

•ON: DNR (digital noise reduction) can be set

•OFF: Fixed gain values can be adjusted manually.

☞When ON is set

1Use the cursor button (d or c) to select ON then press the SET button.

The GAIN SETTING screen will appear, and “±0dB” will be blinking for MAX GAIN.

2 Use the cursor button (d or c) to select the gain. Available settings: –6dB,±0dB, +6dB, +9dB

3 Use the cursor button (j or l) to move the cursor to DNR, and then use the cursor button (d or c) to select

ON.

Available settings:

•ON: DNR (Digital Noise Reduction) is applied. Noise from low light will be reduced.

•OFF: DNR will not be applied.

Note: Digital noise reduction works as gain control becomes greater. If images for moving target objects have blurs or afterimages, reduce the resolution sensitivity.

☞When OFF is set

1 Use the cursor button (d or c) to select OFF, then press the SET button.

The GAIN SETTING screen will appear, and “0dB” will be blinking.

Available settings: 0 – 30dB

2 Use the cursor button (d or c) to adjust the gain.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

44