Sanyo vcc-zm300p multi-spotmetering MASK, View Setting, English, Finishing mask pattern setting

VIEW SETTING

Backlight compensation additional settings 3

•48 multi-spot metering (MASK)

1	IRIS SETTING		2
	BLC	MASK ‚
	SENSE UP	OFF
	(LEVEL)
	í-----ú+------ü 40
	PRESET	OFF
	MENU	BACK

BLC MASKING

CONTINUE (ñ)

BLC MASKING

CONTINUE (ñ)

English

1 Use the cursor button (d or c) to select MASK, then	3 Finishing mask pattern setting
press the SET button.	Use the cursor button (j or l) to move a mask pattern to
The BLC MASKING screen will appear and the mask pattern	the bottom area of the screen and continue holding it for 3
will be blinking.	seconds. The PRESET and MENU items will appear on the
2 Use the cursor button (j l d c) to move the cursor to	screen.
move the mask pattern over the area not to be sensed,	• Use the cursor button (l) to select BACK for MENU and
	press the SET button. The IRIS SETTING screen will
then press the SET button.
	reappear.
The mask pattern will be set. You can use the same steps to
	• Use the cursor button (l) to move the cursor to BACK for
set additional mask patterns.
	MENU, use the cursor button (d or c) to select END, and
Note: The initial mask pattern is at the upper left of the screen,	then press the SET button. The normal screen will reappear.
and it is not set. To clear a mask pattern after it is set,
press the SET button again.

28