Sanyo vcc-zm300p Option Setting, Alarm setting Alarm input setting Alarm, Address setting

OPTION SETTING

English

1	MAIN MENU		2
	LANGUAGE	SET	‚
	CAMERA ID	OFF
	SYNC	INT
	PRIVACY MASK	SET	‚
	LENS	SET	‚
	MIRROR	OFF
	VIEW SETTING	1	‚
	OPTION	SET	‚

	OPTION
CONTROL	485	‚
ADDRESS	0
ALARM	SET	‚

ALARM setting

A Alarm input setting (ALARM IN)

Make the following settings for alarm detection.

Connect the external alarm switch to the alarm input terminal on the back of the camera.

ADDRESS setting

1Use the cursor button (j or l) to move the cursor to

OPTION, then press the SET button. The OPTION screen will appear.

1	MAIN MENU		2
	LANGUAGE	SET	‚
	CAMERA ID	OFF
	SYNC	INT
	PRIVACY MASK	SET	‚
	LENS	SET	‚
	MIRROR	OFF
	VIEW SETTING	1	‚
	OPTION	SET	‚

	OPTION
CONTROL	485	‚
ADDRESS	0
ALARM	SET	‚

Note: The PRESET ON setting cannot be used when OPTION settings are in use.

2Use the cursor button (j or l) to move the cursor to ADDRESS, and then use the cursor button (d or c) to select the address.

Available settings: 0 (d) ~ 127 (c)

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

1Use the cursor button (j or l) to move the cursor to

OPTION, then press the SET button. The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION settings are in use.

2Use the cursor button (j or l) to move the cursor to

ALARM, then press the SET button. The ALARM SETTING screen will appear.

3Use the cursor button (d or c) to select POLARITY between “NO” and “NC”.

Available settings:

•NO: Normal open (Normally open so closed condition is detected as input.)

•NC: Normal closed (Normally closed so open condition is detected as input.)

47