Sanyo vcc-zm300p instruction manual Alarm output setting Alarm OUT

OPTION SETTING

BAlarm output setting (ALARM OUT)

English

1ALARM SETTING

ALARM IN
POLARITY	NO
MOTION	OFF
DURATION	5S
ALARM OUT	OFF
POLARITY	NO
ALARM TIME	5S
LINE OUT	OFF

2ALARM SETTING

ALARM IN
POLARITY	NO
MOTION	OFF
DURATION	5S
ALARM OUT	OFF
POLARITY	NO
ALARM TIME	5S
LINE OUT	OFF

1Use the cursor button (j or l) to move the cursor to ALARM OUT, then use the cursor button (d or c) to select the “ON” or “ OFF”.

Available settings:

•ON: Output an alarm (for activation of buzzer or lamp)

•OFF: Does not output an alarm

2Use the cursor button (j or l) to move the cursor to POLARITY, then use the cursor button (d or c) to select the “NO” or “NC”.

Available settings:

•NO: Normal open (Normally open so closed condition is detected as input.)

•NC: Normal closed (Normally closed so open condition is detected as input.)

3Use the cursor button (j or l) to move the cursor to ALARM TIME, then use the cursor button (d or c) to select the amount of time for external alarm output.

Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

49