Fisher & Paykel CI905DTB When Auto Heat-reduce is set, Approx. length of time at highest setting

20

Using your cooktop’s special features

When Auto Heat-reduce is set

Initially, while the cooking zone is at the highest setting, A will flash alternately with your selected lower setting. The length of time at the highest setting depends on the lower heat setting selected. See chart below.

Then, when the period of highest setting is over, A will stop flashing and the cooking zone will automatically reduce the heat to your pre-selected lower setting.

If you would like a lower or higher heat setting than you originally selected, simply slide to the new setting and hold until the A starts flashing. Alternatively, wait until A stops flashing and then modify the heat setting.

Pre-selected lower heat setting	Approx. length of time at highest setting
1	40 seconds
2	1 minute
3	2 minutes
4	3 minutes
5	4 minutes
6	7 minutes
7	2 minutes
8	3 minutes

To quit the Auto Heat-reduce setting while A is flashing

Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.

Note:

The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn PowerBoost on when Auto Heat-reduce is already set, the Auto Heat-reduce will cancel and PowerBoost will stay on.