Manuals / Fisher & Paykel / Kitchen Appliance / Cooktop

Fisher & Paykel CI754DTB, CI603DTB Using Automatic Cooking in bridged mode, To cancel bridging

Models: CI302DTB CI604DTB CI905DTB CI603DTB CI754DTB

1 40

Download 40 pages 49.24 Kb

Page 30

28

Using your cooktop’s special features

If no pan is detected on one cooking zone:

The left hand display will still show the selected temperature and the right hand display will still show .

If after 10 minutes no pan is detected: the bridging function will switch off.

the cooking zone without a detectable pan will turn off.

the remaining cooking zone will continue cooking at the selected heat setting.

Using Automatic Cooking in bridged mode

1Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.

2 Using the left hand setting selector, select the heat setting.

3 Hold your finger on the control at the selected heat setting until A flashes alternately with the selected setting.

To cancel bridging

At the same time, touch the setting selectors of both bridged cooking zones. The bridging indicator lights will go out.

Note: Sliding the scale down to 0 will not turn off bridging.

Note: Cancelling bridging will also cancel the timer for those cooking zones.

Using the timer in bridged mode:

You may only set one timer for the bridged cooking zone. See ‘Setting the timer’.

The timer indicator will show in both displays.

Image 30

Fisher & Paykel CI754DTB Using Automatic Cooking in bridged mode, To cancel bridging, Using the timer in bridged mode

Contents

User guide Page Contents Safety and warnings Operation and maintenanceFailure to follow this advice may result in death Safety and warnings Important safety instructions Important safety instructions Important safety instructions Introduction Before using your new cooktopUsing the touch controls Introducing your cooktopChoosing the right cookware Using your induction cooktop Power PowerBoost Recommended250mm bridged To select a setting on the selector Control panelWhite indicator light will glow To start cookingIf a display flashes alternately with the heat setting SmartZones CI604DTB & CI302DBT models onlyDual zone cooking CI905DTB & CI603DTB models only When you have finished cooking 1a Turn the cooking zone off by touching orBeware of hot surfaces Locking the controls To lock the controlsTo unlock the controls To set a cooking zone for PowerBoost Using your cooktop’s special featuresUsing the PowerBoost feature When PowerBoost is setCI754DTB model shown as an example Using the GentleHeat feature To quit the GentleHeat settingTo set a cooking zone for GentleHeat Using the Auto Heat-reduce feature To set a cooking zone for Auto Heat-reduceWhen Auto Heat-reduce is set Approx. length of time at highest settingTo quit the Auto Heat-reduce setting while a is flashing If you are not using any cooking zones Using the timerUsing the timer as a minute minder When the set time is upUsing your cooktop’s special features Setting the timer to turn one or more cooking zones off When the timer is set When the set time is upSetting the minute minder when other timers are set To change or cancel a timer setting To select the bridging function Using your cooktop’s special features If no pan is detectedUsing Automatic Cooking in bridged mode To cancel bridgingUsing the timer in bridged mode Simmering, cooking rice Cooking guidelinesCooking tips Searing steakHeat settings Heat setting Care and cleaning What? How?Troubleshooting Troubleshooting chartSet PowerBoost Setting especiallyWhen you are trying to Some pans make This may be caused by Crackling or clickingWarranty and service Before you call for service or assistanceProduct details Dealer Suburb TownPage NZ AU GB IE