About TurboCool.™

How it Works

TurboCool™ rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

Press TurboCool. The refrigerator temperature display will show TC.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

NOTES:

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

About ClimateKeeper2.™

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

How it Works

The new ClimateKeeper2™ is the industry’s most advanced refrigeration system, delivering optimum temperature and humidity performance to keep food fresh longer and reduce freezer burn, while maintaining E star-level efficiency.

The new ClimateKeeper2 system features two evaporators—one for the refrigerator and one for the freezer.

This provides two separate cooling systems for the entire unit, and separates the airflow between the fresh food and freezer sections during normal cooling operations.*

This ensures that the humidity levels in the fresh food section are significantly higher than in a conventional system,** allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now be stored on open shelves without excessive moisture loss.

The separate airflow system minimizes the mixing of air between the two compartments, which reduces odor transfer, resulting in improved taste of ice.

The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby improving the temperature maintained in the freezer and reducing freezer burn.

*Freezer air is used in the CustomCool feature.

**Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units.

6

Page 5 Page 7
Page 6
Image 6
GE 200D2600P043 installation instructions About TurboCool, About ClimateKeeper2, How it Works, How to Use
Page 5 Page 7

200D2600P043 specifications

The GE 200D2600P043 is a sophisticated and high-performance electric motor designed by General Electric (GE), a leader in industrial technology and manufacturing. This motor is utilized in various applications, including compressors, pumps, and conveyors, showcasing its versatility and reliability across several industries.

One of the standout features of the GE 200D2600P043 is its robust construction, designed to withstand demanding operational environments. The motor is built using high-quality materials, ensuring a prolonged service life and minimal maintenance requirements. Additionally, the motor's design enables it to operate efficiently under extreme conditions, making it suitable for applications in sectors like oil and gas, manufacturing, and power generation.

In terms of technology, the GE 200D2600P043 incorporates cutting-edge advancements to enhance its performance. The motor is equipped with a state-of-the-art cooling system, which ensures optimal temperature regulation during operation. This feature significantly reduces the risk of overheating and contributes to the overall longevity of the motor. Furthermore, the motor utilizes advanced winding techniques that improve efficiency and reduce energy consumption, aligning with modern demands for sustainability and cost-effectiveness.

The characteristics of the GE 200D2600P043 also include a high power-to-weight ratio, which allows for powerful performance without excessive weight. This characteristic is particularly advantageous in applications where space and weight constraints are critical. The motor also features precision-engineered bearings and components that minimize friction and noise, resulting in quieter operation and reduced wear over time.

Another notable aspect of the GE 200D2600P043 is its adaptability. It can be customized with various options, including different voltage ratings and motor speeds, making it suitable for specific operational requirements. This flexibility ensures that the motor can be seamlessly integrated into existing systems while meeting the unique needs of different applications.

In conclusion, the GE 200D2600P043 is a prime example of GE's commitment to innovation and excellence in electric motor technology. Its combination of durability, advanced features, and adaptability makes it a preferred choice for industries seeking reliable and efficient motor solutions. With its impressive performance and engineering, this motor continues to set a benchmark in the electric motor landscape.
Top Page Image Contents