About the shelves, bins and racks | GE 200D2600P043 specs

Instructions

About the shelves, bins and racks.

Not all features are on all models.

Snugger

Refrigerator Door Bins and Freezer Door Tilt-Out Bins

Instructions Operating Instructions Safety

Refrigerator bin

Freezer tilt-out bin

Large Bins

The larger refrigerator door bins and freezer tilt-out door bins are adjustable.

To remove: Lift the front of the bin straight up, then lift up and out.

To replace or relocate: Engage the back side of the bin in the molded supports of the door. Then push down on the front of the bin. Bin will lock in place.

Small Bins

To remove: Lift the front of the bin straight up then out.

To replace: Position the bin above the rectangular molded supports on the door. Then slide the bin down onto the support to lock it in place.

The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the snugger near the rear and move it back and forth to fit your needs.

Do not block CAUTION: Be

careful when placing items in the top bin. Make sure that items do not block or fall into the ice chute.

Door Wine/Beverage Rack (on some models)

Consumer Support Troubleshooting Tips Installation

This rack holds up to 5 cans, one bottle of wine or one 2-liter bottle of soda.

The rack hangs from the sides of the dairy bin.

To remove:

Empty the wine/beverage rack.

Holding the bottom of the dairy bin, lift the front straight up, then lift up and out.

To detach the rack from the dairy bin, pull the rack’s side wires out of the holes on each side of the dairy bin.

To replace:

Reattach the rack to the sides of the bin.

Engage the back side of the bin in the molded supports on the door. Then push down on the front of the bin. The bin will lock into place.

200D2600P043 specifications

The GE 200D2600P043 is a sophisticated and high-performance electric motor designed by General Electric (GE), a leader in industrial technology and manufacturing. This motor is utilized in various applications, including compressors, pumps, and conveyors, showcasing its versatility and reliability across several industries.

One of the standout features of the GE 200D2600P043 is its robust construction, designed to withstand demanding operational environments. The motor is built using high-quality materials, ensuring a prolonged service life and minimal maintenance requirements. Additionally, the motor's design enables it to operate efficiently under extreme conditions, making it suitable for applications in sectors like oil and gas, manufacturing, and power generation.

In terms of technology, the GE 200D2600P043 incorporates cutting-edge advancements to enhance its performance. The motor is equipped with a state-of-the-art cooling system, which ensures optimal temperature regulation during operation. This feature significantly reduces the risk of overheating and contributes to the overall longevity of the motor. Furthermore, the motor utilizes advanced winding techniques that improve efficiency and reduce energy consumption, aligning with modern demands for sustainability and cost-effectiveness.

The characteristics of the GE 200D2600P043 also include a high power-to-weight ratio, which allows for powerful performance without excessive weight. This characteristic is particularly advantageous in applications where space and weight constraints are critical. The motor also features precision-engineered bearings and components that minimize friction and noise, resulting in quieter operation and reduced wear over time.

Another notable aspect of the GE 200D2600P043 is its adaptability. It can be customized with various options, including different voltage ratings and motor speeds, making it suitable for specific operational requirements. This flexibility ensures that the motor can be seamlessly integrated into existing systems while meeting the unique needs of different applications.

In conclusion, the GE 200D2600P043 is a prime example of GE's commitment to innovation and excellence in electric motor technology. Its combination of durability, advanced features, and adaptability makes it a preferred choice for industries seeking reliable and efficient motor solutions. With its impressive performance and engineering, this motor continues to set a benchmark in the electric motor landscape.

GE 200D2600P043 About the shelves, bins and racks, Door Wine/Beverage Rack on some models

Models: 200D2600P043