Installation Instructions

1

A

B

CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE (icemaker and dispenser models)

A cold water supply is required for automatic icemaker and dispenser operation. If there is not a cold water supply, you will need to provide one. See “Installing the Water Line” section.

NOTES:

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

If your refrigerator does not have a water filter, we recommend installing one if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator. If using GE SmartConnectRefrigerator Tubing Kit, you will need an additional tube (WX08X10002) to connect the filter. Do not cut plastic tube to install filter.

If you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnecttubing, the nuts are already assembled to the tubing.

If you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnecttubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

 

1/4 Tubing

1/4

 

Compression Nut

 

Ferrule

 

(sleeve)

 

Refrigerator

SmartConnectTubing

Connection

 

2TURN ON THE WATER SUPPLY

Turn the water on at the shutoff valve (house water supply) and check for any leaks.

3PLUG IN THE REFRIGERATOR

Before plugging in the refrigerator, make sure the icemaker power switch is set to the O (off) position.

See the grounding information attached to the power cord.

27

Page 27
Image 27
GE 200D2600P043 installation instructions Turn on the Water Supply, Plug in the Refrigerator

200D2600P043 specifications

The GE 200D2600P043 is a sophisticated and high-performance electric motor designed by General Electric (GE), a leader in industrial technology and manufacturing. This motor is utilized in various applications, including compressors, pumps, and conveyors, showcasing its versatility and reliability across several industries.

One of the standout features of the GE 200D2600P043 is its robust construction, designed to withstand demanding operational environments. The motor is built using high-quality materials, ensuring a prolonged service life and minimal maintenance requirements. Additionally, the motor's design enables it to operate efficiently under extreme conditions, making it suitable for applications in sectors like oil and gas, manufacturing, and power generation.

In terms of technology, the GE 200D2600P043 incorporates cutting-edge advancements to enhance its performance. The motor is equipped with a state-of-the-art cooling system, which ensures optimal temperature regulation during operation. This feature significantly reduces the risk of overheating and contributes to the overall longevity of the motor. Furthermore, the motor utilizes advanced winding techniques that improve efficiency and reduce energy consumption, aligning with modern demands for sustainability and cost-effectiveness.

The characteristics of the GE 200D2600P043 also include a high power-to-weight ratio, which allows for powerful performance without excessive weight. This characteristic is particularly advantageous in applications where space and weight constraints are critical. The motor also features precision-engineered bearings and components that minimize friction and noise, resulting in quieter operation and reduced wear over time.

Another notable aspect of the GE 200D2600P043 is its adaptability. It can be customized with various options, including different voltage ratings and motor speeds, making it suitable for specific operational requirements. This flexibility ensures that the motor can be seamlessly integrated into existing systems while meeting the unique needs of different applications.

In conclusion, the GE 200D2600P043 is a prime example of GE's commitment to innovation and excellence in electric motor technology. Its combination of durability, advanced features, and adaptability makes it a preferred choice for industries seeking reliable and efficient motor solutions. With its impressive performance and engineering, this motor continues to set a benchmark in the electric motor landscape.