About the refrigerator doors.

Refrigerator Doors

The refrigerator doors may feel different than the ones you are used to. The special door opening/closing feature makes sure the doors close all the way and are securely sealed.

When opening and closing the door you will notice a stop position. If the door is opened past this stop point, the door will remain open to allow you to load and unload food more easily. When the door is only partially open, it will automatically close.

The resistance you feel at the stop position will be reduced as the door is loaded with food.

When the door is only partially open, it will automatically close.

Beyond this stop the door will stay open.

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Door Alignment

If doors are uneven, adjust the refrigerator door.

Using a 7/16″ wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)

7/16″ Wrench

Raise

After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.

10

Page 9 Page 11
Page 10
Image 10
GE 200D2600P043 installation instructions About the refrigerator doors, Refrigerator Doors, Door Alignment
Page 9 Page 11

200D2600P043 specifications

The GE 200D2600P043 is a sophisticated and high-performance electric motor designed by General Electric (GE), a leader in industrial technology and manufacturing. This motor is utilized in various applications, including compressors, pumps, and conveyors, showcasing its versatility and reliability across several industries.

One of the standout features of the GE 200D2600P043 is its robust construction, designed to withstand demanding operational environments. The motor is built using high-quality materials, ensuring a prolonged service life and minimal maintenance requirements. Additionally, the motor's design enables it to operate efficiently under extreme conditions, making it suitable for applications in sectors like oil and gas, manufacturing, and power generation.

In terms of technology, the GE 200D2600P043 incorporates cutting-edge advancements to enhance its performance. The motor is equipped with a state-of-the-art cooling system, which ensures optimal temperature regulation during operation. This feature significantly reduces the risk of overheating and contributes to the overall longevity of the motor. Furthermore, the motor utilizes advanced winding techniques that improve efficiency and reduce energy consumption, aligning with modern demands for sustainability and cost-effectiveness.

The characteristics of the GE 200D2600P043 also include a high power-to-weight ratio, which allows for powerful performance without excessive weight. This characteristic is particularly advantageous in applications where space and weight constraints are critical. The motor also features precision-engineered bearings and components that minimize friction and noise, resulting in quieter operation and reduced wear over time.

Another notable aspect of the GE 200D2600P043 is its adaptability. It can be customized with various options, including different voltage ratings and motor speeds, making it suitable for specific operational requirements. This flexibility ensures that the motor can be seamlessly integrated into existing systems while meeting the unique needs of different applications.

In conclusion, the GE 200D2600P043 is a prime example of GE's commitment to innovation and excellence in electric motor technology. Its combination of durability, advanced features, and adaptability makes it a preferred choice for industries seeking reliable and efficient motor solutions. With its impressive performance and engineering, this motor continues to set a benchmark in the electric motor landscape.
Top Page Image Contents