Manuals / GE / Kitchen Appliance / Refrigerator

GE 200D2600P043 installation instructions What YOU will Need

Models: 200D2600P043

1 124
Download 124 pages 15.75 Kb
Page 30
Image 30

Installation Instructions

INSTALLING THE WATER LINE (ICEMAKER & DISPENSER MODELS)

BEFORE YOU BEGIN

Recommended copper water supply kits are WX8X2, WX8X3 or WX8X4, depending on the amount of tubing you need. Approved plastic water supply lines are GE SmartConnect™ Refrigerator Tubing (WX08X10002, WX08X10006, WX08X10015 and WX08X10025).

When connecting your refrigerator to a GE Reverse Osmosis Water System, the only approved installation is with a GE RVKit. For other reverse osmosis water systems, follow the manufacturer’s recommendations.

If the water supply to the refrigerator is from a Reverse Osmosis Water Filtration System AND the refrigerator also has a water filter, use the refrigerator’s filter bypass plug. Using the refrigerator’s water filtration cartridge in conjunction with the RO filter can result in hollow ice cubes and slower water flow from the water dispenser.

This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage. Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.

To prevent burns and product damage, do not hook up the water line to the hot water line. If you use your refrigerator before connecting the water line, make sure the icemaker power switch is in the O (off) position.

Do not install the icemaker tubing in areas where temperatures fall below freezing. When using any electrical device (such as a power drill) during installation, be sure the device is double insulated or grounded in a manner to prevent the hazard of electric shock, or is battery powered.

All installations must be in accordance with local plumbing code requirements.

WHAT YOU WILL NEED

•Copper or GE SmartConnect™ Refrigerator Tubing kit, 1/4″ outer diameter to connect the refrigerator to the water supply. If using copper, be sure both ends of the tubing are cut square.

To determine how much tubing you need: measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then add 8′ (2.4 m). Be sure there is sufficient extra tubing (about 8′ [2.4 m] coiled into 3 turns of about 10″ [25 cm] diameter) to allow the refrigerator to move out from the wall after installation.

GE SmartConnect™ Refrigerator Tubing Kits are available in the following lengths:

2′ (0.6 m) – WX08X10002

6′ (1.8 m) – WX08X10006

15′ (4.6 m) – WX08X10015

25′ (7.6 m) – WX08X10025

Be sure that the kit you select allows at least 8′ (2.4 m) as described above.

30

Page 29 Page 31
Page 30
Image 30
GE 200D2600P043 installation instructions What YOU will Need
Page 29 Page 31

200D2600P043 specifications

The GE 200D2600P043 is a sophisticated and high-performance electric motor designed by General Electric (GE), a leader in industrial technology and manufacturing. This motor is utilized in various applications, including compressors, pumps, and conveyors, showcasing its versatility and reliability across several industries.

One of the standout features of the GE 200D2600P043 is its robust construction, designed to withstand demanding operational environments. The motor is built using high-quality materials, ensuring a prolonged service life and minimal maintenance requirements. Additionally, the motor's design enables it to operate efficiently under extreme conditions, making it suitable for applications in sectors like oil and gas, manufacturing, and power generation.

In terms of technology, the GE 200D2600P043 incorporates cutting-edge advancements to enhance its performance. The motor is equipped with a state-of-the-art cooling system, which ensures optimal temperature regulation during operation. This feature significantly reduces the risk of overheating and contributes to the overall longevity of the motor. Furthermore, the motor utilizes advanced winding techniques that improve efficiency and reduce energy consumption, aligning with modern demands for sustainability and cost-effectiveness.

The characteristics of the GE 200D2600P043 also include a high power-to-weight ratio, which allows for powerful performance without excessive weight. This characteristic is particularly advantageous in applications where space and weight constraints are critical. The motor also features precision-engineered bearings and components that minimize friction and noise, resulting in quieter operation and reduced wear over time.

Another notable aspect of the GE 200D2600P043 is its adaptability. It can be customized with various options, including different voltage ratings and motor speeds, making it suitable for specific operational requirements. This flexibility ensures that the motor can be seamlessly integrated into existing systems while meeting the unique needs of different applications.

In conclusion, the GE 200D2600P043 is a prime example of GE's commitment to innovation and excellence in electric motor technology. Its combination of durability, advanced features, and adaptability makes it a preferred choice for industries seeking reliable and efficient motor solutions. With its impressive performance and engineering, this motor continues to set a benchmark in the electric motor landscape.