Sanyo VPC-H2GX Specify the start point of the extract, Procedure Play, Accelerated playback

5 Specify the start point of the extract.

hUse the procedure below to specify the frame from which the video clip extract will start.

hPlay the video clip until approximately the desired point, pause the

video clip, then play the video clip one frame at a time, stopping at the start point of the extract. This will be the first frame of the extract.

hIf the start point of the video clip is also the start point of the extract,

proceed to step 6.

<Procedure>

Play:

After pausing playback, press and hold the SET button to the right for about 2 seconds for forward playback, or to the left for reverse playback.

Pause:

During playback, press the SET button.

Accelerated playback:

During playback, toggle the SET button to the left or right to change the playback speed.

Single frame:

After pausing playback, toggle the SET button to the right to move forward one frame, or to the left to move back one frame.

6 Toggle the SET button up.

hThe start point of the video clip extract is set, and the screen to specify the end point appears.

hSpecify the end point of the extract by following the same procedure as in step 5.

<When joining the first and latter portions>

1Toggle the SET button down. h Each time the SET button is

toggled down, the sections to delete and the sections to save

are reversed.

2Specify the end point of the extract. The frame following the end point of the extract will be the start point of the latter portion to be joined.

Approximate playback time

CUT	00:01:10
Press shutter to save

End point

Portion to be deleted

English 114