Sanyo VPC-HD2EX, VPC-H2GX instruction manual Specifications

SPECIFICATIONS

Shutter speed	Still image shooting mode: 1/2 to 1/2,000 sec.
	(Maximum approx. 4 seconds when scene select
	function set to lamp Q)
	(During flash: 1/30 to 1/2,000 sec.)
	Sequential shots mode: 1/15 to 1/2,000 sec. (no
	flash)
	Video clip recording mode: 1/30 to 1/10,000 sec.
	(1/15 sec. max.: when scene select function is set
	to lamp mode Q)
Sensitivity	Still image shooting mode (Standard output
	sensitivity*):
	Auto (ISO 50 to 400)/ISO 50, ISO 100, ISO 200,
	ISO 400, ISO 800, and ISO 1600 (switchable from
	Shooting Setting Screen)
	* Sensitivity measured in compliance with the
	ISO standard (ISO 12232:2006).
	Video clip recording mode:
	Auto (equivalent to ISO 200 to 1600)/equivalent to
	ISO 200, ISO 400, ISO 800, ISO 1600, and ISO
	3200 (switchable from Shooting Setting Screen)
	* Maximum ISO sensitivity up to 3200 equivalent
	when Scene Select function is set to Q
Minimum subject	18 lux (HD mode/normal mode, 30 fps, 1/30 sec in
illumination	AUTO mode)
	7 lux (HD mode/normal mode, 30 fps; 1/15 sec in the
	HIGH SENSITIVITY or lamp mode)
Image stabilizer	Electronic (video clip recording mode only)
Monitor	Amorphous silicon TFT color liquid crystal
	(transmissive)
	150,000 pixels (frame coverage: approx. 100%)
Flash working	GN = 6.4
range	Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
	(Wide)
	Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Flash modes	Auto-flash, forced flash, flash off, red-eye reduction

199English