Setting the Amount of Rinse Aid Required | Zanussi ZSF 6171 specs

Setting the Amount of Rinse Aid Required

3Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dish- washing results are not satisfactory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in the factory.

1.Open the dishwasher door.

2.Press the release button on the rinse aid compart- ment.

3.Open the cover.

4.Set the dosage level.

5.Press the lid shut until it clicks into place.

6.If rinse aid has leaked out, wipe it away with a cloth.

13

Image 13

Zanussi ZSF 6171 manual Setting the Amount of Rinse Aid Required

Contents

ZSF Dear Customer Following symbols are used in the text Contents Prior to using for the first time SafetyChild Safety General Safety Dishwasher door safety catch Diagram of Appliance Function button Control Panel Rinse Aid SaltWater Door Setting the Water Softener Prior to Using for the First TimeSetting manually Water hardness Adjusting the hardness setting Indication on Setting electronicallyRange Manual Electronic Multi-display Adding dishwasher Salt Only when using the dishwasher for the first time Filling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating rinse aid inflow when 3in1 function is selected Loading cutlery and dishes Daily use Pots, Pans, Large Plates Loading cutlery Cups, Glasses, Coffee Service Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basket Adding Detergent Detergent tablets Concentrated detergents If you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 products Selecting the dishwashing cycle Cycle Table Selecting a programme Cancelling the wash programme Interrupting or Cancelling a dish- washing cycleStarting a Dishwashing Cy- cle Switching Off the dish- washer Setting the Delay TimerCare Plus additional function Removing the Dishes Cleaning the filters Care and cleaning Upper basket spray arm Cleaning the spray arm jets Remedying small malfunc- tions What to do ifBottom spray arm Malfunction Possible cause Remedy Malfunction Possible cause Remedy Dishes are still dirty If the dishwashing results are not satisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishes Packaging material DisposalOld appliance Dishwasher Free-standing appliances Technical data Lower basket with cutlery basket Cutlery basket Sample loading arrangements Safety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressure Extension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high level Changing a fuse Electrical Connection Connecting systems European guarantee Standard guarantee conditionsThis guarantee does not cover ExclusionsPage Customer Care Department 0870 5 929 822 612 Subject to change without notice