Zanussi ZSF 6171 manual Using 3in1 detergents, If you want to use 3in1 products

Models: ZSF 6171

1 44
Download 44 pages 30.13 Kb
Page 21
Image 21

Using 3in1 detergents

These products are detergents with a combined cleaning, rinsing and salt function.

When the 3in1 function is activated,

the addition of special salt and rinse aid from the respective dispenser is prevented.

If the salt and rinse aid dispensers are empty, this is not indicated.

The dishwashing cycles can be up to 30 minutes longer.

3If you want to use 3in1 detergents, check whether these detergents are suitable for your water hardness. (Follow manufacturer’s in- structions!)

If your water hardness is higher than that rec- ommended by the manufacturer but you would nevertheless like to use 3in1 detergent, proceed as follows:

With the 3in1 function selected, set the water sof- tener one hardness setting lower than when rinsing without 3in1 detergent.

Fill up the dispenser (if this is empty) with special salt.

The dishwasher remembers the two different set- tings of the degree of hardness for rinsing with and without 3in1 function.

If you want to use 3in1 products

1.Press the ON/OFF button.

2.Press the 3 IN 1 button.

The button indicator lights up: 3in1 function is se- lected.

Before the start of the dishwashing cycle put 3in1 detergent in the detergent dispenser.

3As the rinse aid inflow is automatically switched off when the 3in1 function is activat- ed, it may come about because of the different quality standards in the 3in1 detergent, that the dishes do not dry sufficiently.

If this happens, proceed as follows (see sec- tion “Adding rinse aid”):

Fill up the dispenser (if this is empty) with rinse aid.

Set rinse aid dosage to “2” mechanically.

Activate rinse aid inflow.

If you do not want to use 3in1 products any more

If you want to stop using 3in1 products, please do the following:

Deactivate the 3in1 function.

Fill up the dispensers for salt and rinse aid again.

Switch the water softener to the highest setting and perform up to three normal cycles without loading any dishes.

Then set the water softener to the water hardness in your area.

If you want to use 4in1 products

When using "4 in 1" detergents that integrate also anti- glass corrosion agent into "3 in 1" formula, please follow the same indication as given for "3 in 1" detergents.

21

Page 21
Image 21
Zanussi ZSF 6171 Using 3in1 detergents, If you want to use 3in1 products, If you do not want to use 3in1 products any more