Canon 1630, 1670F, 1610 manual Additional Functions Menu Settings, Common Settings

4

Customizing Settings

Additional Functions Menu Settings

Common Settings

Setting Item	Descriptions
STACK BYPASS SIZE	Selects the size of paper in the stack bypass.
OFF	Select when you set to FREE SIZE or SET ON LOADING.
	FREE SIZE: Free size (default)
	SET ON LOADING: Select when specifying the paper size each time
	you use the stack bypass. The paper or envelope type can also be
	specified in SET ON LOADING.
ON	LTR, STMT, CUSTOM PAPER SIZE (length and width can be specified
	in millimeters), A4, B5, A5, LGL
DRAWER PAPER SIZE	Select the size of paper loaded in the paper drawer.
	LTR/LGL (default), FOLIO, FOOLSCAP, A4
PRINT EXPOSURE	The exposure can be adjusted to one of five levels.
	(Default is center.)
BYPASS PAPERTYPE	Select the paper type.
	PLAIN PAPER (default), TRACING PAPER, TRANSPARENCY, SPECIAL
	PAPER 1, SPECIAL PAPER 2
	If you select a paper type other than PLAIN PAPER and select the stack
	bypass with [Paper Select], A will appear on the standby display.
COPY POWER LEVEL	Sets a copy power level.
HIGH	Sets a high copy power level. Select this setting when making copies on
	thick paper or when the humidity is high.
	(If you set this to HIGH and select the stack bypass with [Paper Select],
	# will appear on the standby display.)
NORMAL	Sets a normal copy power level. (This is the default.)
LOW	Sets a low copy power level. Select this setting to ensure correct
	copying when making copies in Photo mode after making a large
	number of copies in high-temperature and high-humidity conditions. In
	other modes, copies may not be reproduced clearly.
	(If you set this to LOW, # will appear on the standby display.)

4-4Additional Functions Menu Settings