Cleaning the Rollers Inside the Main Unit

If the rollers inside the main unit are dirty, the copy quality will deteriorate.In this

case, you can clean the rollers using the <ADJUST/CLEAN> setting from the

<ADDITIONAL FUNCTIONS> menu.

While the In Use/Memory indicator is lit, the machine does not clean the roller even
if you perform the procedure below (imageRUNNER 1670F model only).
1
Press [Additional Functions].
2

Press [4] or [e] to select <ADJUST/CLEAN> press [Set].

3

Press [4] or [e] to select <ROLLER CLEANING>.

4

Set letter size paper in the stack bypass.

You must use a plain sheet of letter size paper.
5
Press [Set].
The machine begins cleaning the rollers.
It takes about three minutes to clean the roller.
Set
ADJUST/CLEAN
1.ROLLER CLEANING
Set
5-16 Routine Cleaning
5
Routine Maintenance
NOTE
NOTE
IMPORTANT
**RG_Chap 05 3/4/04 7:45 PM Page 16