20
English
Basic Features
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu

¦Setting the Time

O
MENU
m
→ Setup → Time → ENTER
E
Time
■Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in ord er to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast statio n and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
✎
Available only when Clock Mode is s et to
Manual.
✎
You can set the Month, Day, Year, Hour and
Minute directly by pressing the numb er buttons
on the remote control.
Time Zone: Select your time zone.
✎
This function is only available w hen the Clock
Mode is set to Auto.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
✎
This function is only available w hen the Clock
Mode is set to Auto.

¦Using the Sleep Timer

O
MENU
m
→ Setup → Time → Sleep Timer →
ENTER
E
■Sleep Timer: Automatically shuts off the TV
after a preset period of time. (30, 60, 90,
120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select
Off.

¦Setting the On / Off Timer

O
MENU
m
→ Setup → Time → Timer 1 →
ENTER
E
You can set the TV to turn on automatically at a preset time.
■Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.

SLEEP

20 TV Air 1
00 00 am
00 00 am
▲
▼
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun Mon Tue Wed Thu Fri Sat
Once
Source Antenna Channel
Repeat
L
Move
U Adjust E
Enter
R
Return
[UC5000_USA]BN68-02625A-02Eng.indb 20 2010-06-28 오전 11:40:31