Advanced Features
Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.
Method 1 | Method 2 |
Connect using the USB right angle adapter | Connect via an extension cable |
| ✎✎ The Samsung Wireless LAN Adapter should be installed in an |
| |
| adapter and tuner. |
or
To connect the Samsung Wireless LAN Adapter using the USB right angle | To connect the Samsung Wireless LAN Adapter using an extension | ||
adapter, follow these steps: | cable, follow these steps: | ||
1. | Connect the USB right angle adapter to the Samsung Wireless LAN | 1. | Connect the extension cable to the USB 1 (HDD) port. |
| Adapter. | 2. | Connect the extension cable and Samsung Wireless LAN |
2. | Connect the other end of the right angle adapter to the USB 1 (HDD) |
| Adapter. |
| port. | 3. | Attach the Samsung Wireless LAN Adapter to the back of the TV |
|
|
| near the top, using |
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1.Connect your TV to Samsung Wireless LAN Adapter as described in the previous section.
2.Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTEREbutton.
3.Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTEREbutton.
4.On the Network screen, select Network Type.
5.Set Network Type to Wireless.
6.Select Network Setup. The Network Setup screen appears.
Network Setup
Select a Network | : Not Selected ► |
| |||||||||||
Internet Protocol Setup | : Auto | ||||||||||||
IP Address | : |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||
Subnet Mask | : |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| ||||
Gateway | : |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
DNS | : Auto |
| |||||||||||
DNS Server | : |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||
|
| PBC(WPS) | U Move E Enter R Return | ||||||||||
|
| ||||||||||||
7.Press the Red button on your remote.
8.Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.
9.After the network connection is set up, press the RETURN button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.
