8
Getting Started
English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenn a.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1Selecting a language Press the ▲ or ▼ button, then press the ENTER
E
button. Select the
desired OSD (On Screen Display) language.
P
POWER
2Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
ySelect the Home Use mode. Store Demo mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
3Selecting an antenna Press the ▲ or ▼ button, then press the ENTER
E
button. Select Air, Cable or Auto.
4Selecting a channel Press the ▲ or ▼ button, then press the ENTER
E
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel → Auto Program (p. 13).
✎
Press the ENTER
E
button at any time to interrupt the memoriz ation process.
5Setting the
Clock Mode
Set the Clock Mode automatically or manually.
yAuto: Allows you to select DST (Daylight Saving Time) mode and time zone.
yManual: Allows you to manually set the current date and time (p. 19).
6Viewing the
HD Connection Guide. yThe connection method for the best HD screen quality is displayed.
7Enjoy your TV. Press the ENTER
E
button.
If You Want to Reset This Feature...
O
MENU
m
→ Setup → Plug & Play → ENTER
E
ANT OUT
or
VHF/UHF Antenna
Cable
Power Input
Antenna Cable (Not Supplied)
[UC6300-USA]BN68-03165A-00Eng.indb 8 2010-06-23 오전 9:21:45