Polaroid Polaview 305 manual Proceed to the section Connecting video and audio, Introduction

8Introduction

Macintosh computers

Connecting a Macintosh monitor requires the Polaview VGA /MAC (part number C804) adapter and the existing monitor cable. Use the Polaview adapter only.

1Disconnect your computer-to-monitor cable at the computer end.

2Connect the free end of the monitor cable to the Polaview VGA/MAC adapter.

3Connect the free end of the Mac-to-LCD adapter to the pro- jector VGA OUT connector.

4Use the Polaview Mac-to-LCD connector cable (part number C802-6) to link the projector to the computer. Connect the end marked LCD to the projector COMPUTER IN connector, and the end marked COMPUTER to the computer video-out- put connector.

Proceed to the section Connecting video and audio.

Notebook computers

1Connect the end of the video cable marked COMPUTER to the external monitor connector on your notebook comput- er(or to the video cable adapter supplied with your note- book computer).

2Connect the end of the video cable marked LCD to the FROM COMPUTER connector on the projector.

Proceed to the section Connecting video and audio.

Silicon Graphics workstations

1Disconnect your computer-to-monitor cable at the computer end.

2Connect the free end of the monitor cable to the SGI to LCD adapter

3Connect the free end of the SGI-to-LCD adapter to the pro- jector COMPUTER OUT connector.