Polaroid Polaview 305 manual Proceed to the section Connecting video and audio

Introduction 9

4Use the SGI 13C3-to-LCD connector cable (part number C943-6) to link the projector to the computer. Connect the end marked LCD to the projector COMPUTER IN connector, and the end marked COMPUTER to the SGI workstation video-output connector.

Proceed to the section Connecting video and audio.

Workstations with 13C3 connectors (except SGI)

1Disconnect your computer-to-monitor cable at the computer end.

2Connect the free end of the monitor cable to the projector COMPUTER OUT connector.

3Use the 13C3-to-LCD connector cable (part number C801-6) to link the projector to the computer. Connect the end marked LCD to the projector COMPUTER IN connector, and the end marked COMPUTER to the computer video-output connector.

Proceed to the section Connecting video and audio.

Workstations with BNC connectors

1Note which BNC connectors you are currently using with the monitor. (You always use the R, G, and B connectors, but the way you use the H and V connectors depends on the computer configuration.) Disconnect your computer-to- monitor cable at the monitor (BNC) end.

2Connect the free BNC end to the optional BNC block-to-LCD connector cable (part number C942-2), connecting the same BNC connectors used on the monitor. Plug the LCD end of the cable into the projector COMPUTER IN connector.

3Connect the optional BNC-to-LCD connector cable (part number C803-6) to the projector COMPUTER OUT connec- tor and the monitor BNC-video input. Use the same BNC connections used with the monitor.

Proceed to the section Connecting video and audio.