Polaroid Polaview 305 manual Press the MENU key to display the Main menu

Troubleshooting 103

Half-normal height display

Adjusting the half-normal height display

Use the arrow keys, the SETUP key on the control panel, or use the following procedure to adjust the half-normal height display:

1Press the MENU key to display the Main menu.

2Select Advanced from the Main menu.

3Select the Hor. Pos. (horizontal position) slide bar.

4Press the down arrow key until the image is properly aligned. (If this adjustment does not correct the problem, reset the Hor. Pos. control.)

Note: There are separate Hor. Pos. and Vert. Pos. values for NORMAL and SCALE modes. Adjustments in one mode are not made in the other.

5Press the right arrow key to select the Vert. Pos. (vertical position) slide bar.

6Press the down arrow key until the image is displayed prop- erly. (If this adjustment does not correct the problem, reset the Hor. Pos. control to the default.)

If neither parameter corrects the problem, you must find the correct Dot Clock value to prevent image distortion. Make changes to this parameter slowly to avoid skipping over the desired value. This may require some trial and error.

7Select IMAGE on the Main menu.

8Select the Dot Clock slide bar with the right arrow.