Detailed setup, Connecting video | Polaroid Polaview 305 guide

34Detailed setup

34Detailed setup

The composite audio/video cable (part number C497-6) has a yellow, red, and white RCA plug at each end. To connect an NTSC, PAL, or SECAM source to your projector, make the appropriate cable connections, as indicated in the fol- lowing chart:

	Cable	Projector port	VCR connector

	Yellow	VIDEO 1 or 2	VIDEO OUT,
			TO MONITOR, etc.

	White	AUDIO 1 or 2 IN	L AUDIO OUT
		(white plug)

	Red	AUDIO 1 or 2 IN	R AUDIO OUT
		(red plug)

Connecting video	The projector can also project video from an S-video
from S-video sources	source.

1Connect one end of the S-video cable (part number C466-6) to the VIDEO OUT connector on the video source. The cable has identical, round 4-pin connectors on either end.

2Connect the other end of the cable to the projector S-VIDEO 1 port.

Image 39

Polaroid Polaview 305 manual Detailed setup, Connecting video, from S-video sources

Contents

User Guide Polaview 305 Projector Warning This equipment generates, uses and can Table of contents 2 Detailed setup1 Introduction ii Table of contents 3 Using the projector5 Maintenance 4 Polaroid F/X Index 6 TroubleshootingAppendix B Parts Appendix C Sense lines The Polaview Model 305 Projector in use 1 Introduction 2 Introduction Cyclops interactive pointer systemIntroducing the Adobe Acrobat Player System What’s in the box? DEC 3C3-to-LCD cable and adapter European, U.K., and Italian power cordsMacintosh-to-LCD adapter SGI-to-LCD cable and adapter Quick start Place the projector on a solid, flat surface ing the projection screenof the arrow see the illustration below Caution Never push on or force the mirror. Always use Proceed to the section Connecting video and audio Silicon Graphics workstations 8 IntroductionMacintosh computers Notebook computers Workstations with BNC connectors Workstations with 13C3 connectors except SGI video and audio Connecting10 Introduction DEC workstations Rotate the ring at the base of the projector lens to focus the To raise or lower the image, tilt the mirror assembly accord The remote control and the control panel control onlyPreferences menu remote control onlyMouseDisk control panel f Projection arm 2 Detailed setupSetting up your projector a Flip mirror To open the projector Getting started Top view Perpendicular to the projection screen Side view Detailed setupTop and side views of the projector Sliding the lever to release the arm 18 Detailed setup The arm pops upThe flip-mirror- release lever 1 Tilt the mirror down into the arm until it latches 20 Detailed setup Gaining access to the recessed handleMoving the projector while it is open Plug the power cord into the power-cord receptacle The connector panel of the projector Connecting the projector to your computer You may also need to use an adapter Connects to the computer 13C3-to-LCD connector cable part number C801-6 cable VGA to connectorPCs PC video-out connection to the projector Projecting without an attached monitor The Macintosh- to-LCD connection 26 Detailed setup MAC Monitor Note Some notebook computers require that you press a connections Silicon Graphics 13C3 video connectionsSilicon Graphics workstation BNC video connections 30 Detailed setup3C3 connector DEC 3C3 video connections Computer VIDEO OUT Using the BNC block-to-LCD connector cableBNC-to-LCD connector cable To projector 32 Detailed setup Connecting the Cyclops interactive pointer systemConnecting the Adobe Acrobat Player System Connecting video and audio to the projector 34 Detailed setup Connecting videofrom S-video sources Use the COMPUTER AUDIO IN port to connect audio from a computer 36 Detailed setup Mini-jack to RCAcable adapter To connect the projector to an external stereo system Important precautions 38 Detailed setupAllow sufficient air flow CLEAR Turning the lamp on and off The key The over-temp indicator light 40 Detailed setup Adjusting the image Raising or lowering the image Focusing the imageRotating the focus ring Correcting keystoning A normal vs a keystoned image 42 Detailed setup The size of the projected image depends on the distance Using your projector 3 Using the projector Using the remote control and the control panel When you press the center of the MouseDisk, it functions 48 Using the projector CLEAR Over-temp indicator light, control panel onlyLamp-indicator light, control panel only Switching input sources rately, see Advanced features Using the menus If you want to revert to the original factory settings for a You can also adjust the sync by opening the projector Adjusting the audio 54 Using the projector Adjusting the remote-control mouse tracking Presentation features Click this button to select the Draw tool To open the color palette You can move the Draw toolbar to another spot on the pro Advanced features 60 Using the projector Menus and keys Settings for colors, language mouse button or none procedureStarts the Cyclops calibration to emulate a left, right, or center Source Mode 64 Using the projectorThe Input Source menu Source Select Adjusts the sync setting Adjusts the video color saturation Adjusts the video contrastAdjusts the video brightness Adjusts the video tint Mute VolumeMic. Volume The Audio menu The Projector menu 68 Using the projectorNo Reset Reset Language sync, volume, contrast, tint, horizontalThe Preferences menu Colors 70 Using the projector See Appendix C, Sense lines 4 Polaroid F/X To use Polaroid F/X, follow these steps After installing the software The main screen of the F/X program appears Put Away Using Polaroid F/XSetup Remote Projector Setting To customize an effect screen appears Polaroid F/X. To set up the software, click on SetupRemote in the Assignments area of the main screen Choose Cyclops Wand or Laser Pointer. The following Click on the Edit Navigation Bar button. The following screen appears your projected image while you preview the next image on The Freeze option freezes the image on your projector so Once you freeze your screen, all keys on your remote con Note To enlarge the entire screen, use the Zoom effect Switch to F/X switches to the Polaroid F/X main screen Allows you to copy an effect Allows you to edit F/X optionsTests the current effect Allows you to add an effect area for the remote control or the Cleaning the lens and mirror 5 Maintenance Cleaning the projection window Replacing the lamp Removingthe old lamp the new lamp Installing 5 Close the lamp-chamber door and tighten the captive screw Cleaning/changing air filters the right filters Access to 3 Turn the projector back to its base and raise the projection arm 7 The filters are now exposed see the illustration below Replacing the batteries in the remote control Temperature extremes96 Maintenance Troubleshooting guide 6 Troubleshooting 98 Troubleshooting Appendix A, Specifications Troubleshooting Polaview Model 305 Projector parameter adjustments Input Measurements V Sync 72.00 Hz H Sync 78.00 KHzLines 1057 Sense HLHL Adjusting the Adjusting contrastAdjusting sync Adjusting the VCO gain Adjusting your display 1 Press the MENU key to display the Main menu Vertical double image Adjusting the vertical position 104 Troubleshooting Dark Lines in Scale mode only Faint, vertical linesof distortion Dark, vertical lines pixels, or distortion Noise, flickering Unknown/Unrecognized video source 108 Troubleshooting Compatibility list EWS12 110 Troubleshooting VESA 112 Troubleshooting Where to get help1 Check the Troubleshooting Chart 2 Call your dealer’s technical support line and explain your problem Polaroid Offices and Service Centers 114 Troubleshooting One Year Warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR Appendix A Specifications Stereo audio 2 RCAs Replacement product Appendix B Parts 120 Appendix B Appendix C Sense lines Identifying sense-line settings122 Appendix C Macintosh displays Sense line settings for popular video cards Appendix CInput Measurements windows 124 Appendix C Index 126 Index Index 128 Index Index 130 Index 710-00516-1 PXW8610 9/96 Printed in U.S.A