Polaroid Polaview 305 manual Appendix C, Macintosh displays, Identifying, sense-line settings

122Appendix C

	6 Exit the menus and restart your computer (do not turn off the
		projector).
Macintosh displays		The next table shows typical sense-line settings for Macintosh
		systems, based on the system resolution. Try these settings
		only if you have trouble projecting an image without an exter-
		nal monitor connected to the computer.
		Remember to restart your computer after you make these
		changes.
		Display resolution	Sense-line setting(s)
		640 x 480	Sense 3: High
			Sense 2: High
			Sense 1: High
			Sense 0: Low
		1152 x 870	Sense 3: High
			Sense 2: Low
			Sense 1: Low
			Sense 0: Low
		832 x 624 and	Your system needs a Macintosh termina-
		1024 x 768	tor. Try the Macintosh Sync Adapter
			(02-20-UNV) available from Griffen Com-
			munications Corp., 1451 Elm Hill Pike,
			Park Elm Bldg, Suite 100, Nashville TN
			37210 (615) 399-0990 fax: (615) 399-7060.
Identifying		To determine the current sense-line setting:
sense-line settings	1 Connect the projector to the computer and the monitor.

2 Make sure all hardware is turned on and that the correct resolu- tion is displayed on the monitor and through the projector.

3 Open the projector menus and choose Input Source,

Input Measurements. The four sense-line settings appear in the window.