Roland MP-60 Connect the Power Cord, Setting Up the Music Stand, Connecting Headphones

Models: MP-60

1 44
Download 44 pages 19.08 Kb
Page 8
Image 8

Before You Start Playing

Connect the Pedal Cable

Opening/Closing the Lid

 

 

 

Insert the pedal cable into the Pedal jack on the rear panel of the MP-60.

To open the lid, use both hands to lift it lightly, and slide it away from yourself.

fig.00-01

Connect the Power Cord

Insert the included power cord into the AC inlet on the bottom panel of the MP-60, and then plug it into an electrical outlet.

NOTE

Be sure to use the supplied power cord.

fig.00-02

Setting Up the Music Stand

Insert the music stand into the two holes as shown in

the following diagram.

fig.00-03

NOTE

Before moving the piano, be sure to remove the music stand to

prevent accidents.

To close the lid, pull it gently toward yourself, and lower it softly after it has been fully extended.

fig.00-05

NOTE

When opening and closing the lid, be careful not to let your fingers get caught. If small children will be using the MP-60, adult supervision should be provided.

NOTE

If you need to move the piano, make sure the lid is closed first to prevent accidents.

Connecting Headphones

The MP-60 has two jacks for plugging in headphones. This allows two people to listen through headphones simultaneously, making it very useful for lessons and when performing piano pieces for four hands. Additionally, this allows you to play without having to worry about bothering others around you, even at night.

Plug the headphones into the Phones jack located at the

bottom left of the piano.

Connecting headphones will automatically mute the sound from the internal speakers.

The headphone volume is adjusted by the [VOLUME] knob (p. 9) of the MP-60.

fig.00-04.e

Phones plug x 2

NOTE

Use Stereo headphones.

Some notes on using headphones

To prevent damage to the cord, handle the headphones only by the headset or the plug.

Connecting the headphones when the volume of connected equipment is turned up may result in damage to the headphones. Lower the volume on the MP-60 before plugging in the headphones.

Listening at excessively high volume levels will not only damage the headphones, but may also cause hearing loss. Use the headphones at a moderate volume level.

8

Page 8
Image 8
Roland MP-60 owner manual Connect the Power Cord, Setting Up the Music Stand, Connecting Headphones