Chapter 4. Recording Your Performance
Selecting and Recording the Track for Each Hand Separately
The recorder of the
If you want to
fig.panel4-4
1
As described in steps 1 and 2 of “Recording a New Song” (p. 22), select “USr” before you continue.
1 As necessary, turn on the metronome (p. 14).
2 Press the [REC] button.
The [REC] button’s indicator will light.
The button indicators of tracks that are already recorded will light. The track button for which you will next be recording will be blinking.
Selecting the track to record
3 Press the [1] or [2] button to select the track that you want to record.
The indicator of the button you pressed will blink, and the
Start recording
4 Press the [PLAY] button.
The
Note that recording will also begin as soon as you play anything on the keyboard, even if you do not press the [PLAY] button. There is no count sound played when you start in this manner.
Stop recording
5 Press the [PLAY] or [REC] button.
Recording will stop, and the indicators for the [PLAY] and [REC] buttons will go dark.
Your performance has been recorded to the specified track button.
If you want to record on the other track, return to step 2 to record your performance again. You can record while you listen to the previously recorded performance.
Play back the recorded performance
6 Press the [PLAY] button.
You will hear the recorded performance.
Press the [PLAY] button once again, and playback will stop.
4, 6 2, 5 | 3 |
NOTE
If you go on to record additional material without erasing the recorded song, the song tempo, beat, and metronome settings of the original recording will be used for the new material as well.
The track buttons allow you to record to either the [1] or the [2] button, one at a time.
When a recorded performance is played back, the metronome sounds the sound that was selected when the recording was made.
24
