Installing Your Microwave Oven

 

 

 

 

Place the oven on a flat, level surface that is strong enough to safely

GB

 

bear the weight of the oven.

Setting the Time

Your microwave oven has an inbuilt clock. The time can be displayed in either the 24-hour or 12-hour notation. You must set the clock:

20cm

10cm

above

behind

85cm of

10cm on

the floor

the side

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind, and on the sides of the oven and 20 cm (8 inches) of space above the oven and 85 cm (33 inches) of the floor.

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

•When you first install your microwave oven•After a power failure

✉Do not forget to reset the clock when you switch to and from summer or winter time.

1. To display the time in the.. Then press the button( )..

24-hour notation

Once

12-hour notation

Twice

2. Turn the TIME/WEIGHT (

) dial to set hour.

✽Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

❉For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

✽Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

3.

Press the

button.

 

4.

Turn the TIME/WEIGHT (

) dial to set minute.

5.

Press the

button.

 

6