Samsung CFTD2785 For more information on, Selecting tape speeds, see pages 5.6, 5.7, and A.2

03233A(E)-CHAPTER 5 12/9/03 10:09 AM Page 12

VCR O P E R AT I O N

10

Press the UP/DOWN▲▼ button to select “SPEED”, then press the LEFT/RIGHT œ√ buttons to select speed at which you want to record.

▼ For more information on

selecting tape speeds, see pages 5.6, 5.7, and A.2.

11

Press the UP/DOWN▲▼ button to select “Mode”, then press the UP/DOWN▲▼ buttons to select “Once”, “Wkly”, or “Dly”.

12

Press the MENU button to exit the menu system and return to normal viewing.

13

Press the POWER button to turn off the VCR.

IMPORTANT:

▼ To enter additional program

recording times, repeat steps 1-11.

If you enter two program times that overlap, a program overlap warning appears on the TV screen, along with instructions for fixing the overlap.

The timer indicator on the front panel of the TV illuminates when program times have been stored.

The TV should be turned off to record the programs you’ve chosen.

•The TV should be off to record the programs you’ve chosen. But, if you are recording a channel that comes through a cable box, be sure to leave the cable box turned on and tuned to the channel you want to record.

•When a timer recording is in progress, there is no picture on the monitor because the power is off. If you want to watch the channel while it's being recorded, press POWER on the remote control only.

•One-time timer programs clear from memory automatically when the recording is finished. Daily and weekly programs remain in the timer until you remove them. If power to the TV is interrupted,timer program will be removed from memory.

The clock and calendar, however, must be reset.

5.12 CHAPTER FIVE: VCR OPERATION