2CK99(GB) 3/10/00 11:30 AM Page 19
Setting a Standing Time
The Hold Time can be used to set a standing time automatically (without microwave cooking). You do not need to watch the clock; the oven will beep when the standing time is over.
1Press the Hold/Delay ( 
) button.
Result: The follwing indication are displayed :
(Hold/Delay mode)
2Select the standing time by turning dial knob.
3Press Start ( 
1min+) button.
Result: The oven beeps when the standing time is over.
Multistage Cooking
GB
Your microwave oven can be programmed to cook food in up to four stages (The convection mode can not be used in Multistage cooking).
Example: You wish to defrost food and cook it without having to reset the oven after each stage. You can thus defrost and cook a 1.8 kg chicken in four stages:
◆Defrosting
◆Standing for 20 minutes
◆Microwave cooking for 30 minutes
◆Grill for 15 minutes
➢The first two stages must be defrosting and a standing time. The combination, and grill modes can only be used once each in the remaining two stages; microwave mode can however be used twice at two different power levels.
1Press the Auto Defrost ( 
) button and set the weight by turning the dial knob the appropriate number of times (1.8 kg in the example).
2Press Hold/Delay( 
) button and set the standing time by turning the dial knob the appropriate number of times (20 minutes in the example).
3Press the POWER LEVEL( 
) button .
4Set the microwave power level by the pressing POWER LEVEL( 
) button to appropriate the Power Level (450W in the example)
5Set the cooking time by turning the dial knob (30 minutes in the example).
6Press GRILL( 
) button and set the cooking time by turning the dial knob the appropriate number of times (15 minutes in the example).
7Press Start ( 
1min+) button.
Result: Cooking starts:
◆When the cooking time is over, the oven will be beeping and flashing “:0” four times. And the oven will beep every one minute.
◆If the door is open, or the Stop ( 
) button is pressed, current time will be displayed.
19 |
