Samsung CL-29Z30, CL-29Z40 manual Connecting a VCR, Connecting an S-VHS VCR

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 8-9). Skip step 1 if you have not yet connected to an antenna or a cable system.

ANT IN

TV Rear Panel

VCR Rear Panel

5 Audio Cable (Not supplied)

2

4 Video Cable (Not supplied)

3Antenna Cable (Not supplied)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

➢Also, you can connect to “AV IN 2” on the side panel of TV.

1.Unplug the cable or antenna from the back of the TV.

2.Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3.Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4.Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 or AV IN 2 [VIDEO] jack on the TV.

5.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 or AV IN 2 [L-AUDIO-R] jacks on the TV.

➢If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Side Panel TV Rear Panel

VCR Rear Panel

3 Audio Cable (Not supplied)

2 S-Video Cable (Not supplied)

1 Antenna Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [L-AUDIO-R] jacks on the TV.

English-10