IN S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

▼

This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming Cable

Splitter

Cable Box

13