IN S TA L L AT I O N

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

1

To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

VCR Rear Panel

TV Rear Panel

Coaxial Cable

2

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 1 AUDIO INPUT jacks on the TV.

VCR Rear Panel

TV Rear Panel

Audio Cable

Make sure the jacks you are using are underneath the number “1.”

3

Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the

S-VIDEO INPUT jack on the TV.

VCR Rear Panel

TV Rear Panel

S-Video Cable

An S-video cable is usually included with an S-VHS VCR (If not, check your local electronics store.)

16