Double Quantity Pad Programming
1Hold down Stop/Cancel and then press the DOUBLE QUANTITY pad. press both for 2 seconds.
2 Select desired program code by using NUMBER pads.
3 Press NUMBER pads to set the magnification factor within the range from 1.00 to 9.99.
➢Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
For example, if you are cooking for 1 minute 30 seconds (1:30), and use the default factor(1.65), your new cooking time will be 2 minutes 29 seconds (2:29).
Make sure that you set a correct factor between 1.00 and 9.99 for each memory code number.
4 Press Start pad.
5Press Stop/Cancel pad to exit the programming mode.
➢Though you can successfully set a double quantity factor that exceeds the maximum time allowed for each power level, the oven will not exceed the maximum time when operated.
Feature | Key Entry | Display | Remark |
1 | Hold down Stop/Cancel and then |
| Hold down for 2 sec. |
| Double Quantity pad. |
|
|
2 | Select desired memory |
| If you press pad 1, default value shows |
| number |
| in the display window after 1sec. |
3 | Input desired factor value |
| 1.00 ~ 9.99 available |
| by pressing NUMBER pad. |
| (Change the factor if required.) |
Double Quantity |
|
|
|
Factor Edit |
|
|
|
4 | Start/20sec.+ |
| Reach completion |
If you want to continue to edit new memory number,
follow the above procedures (2~4)
5 | Stop/Cancel | (Mode cancel) | This exits the editing mode. |
15