Samsung CM1329, CM1629 Installation Instructions for Stacking, Replacement of Lamp, Cover

Models: CM1329 CM1629

1 24
Download 24 pages 54.35 Kb
Page 17
Image 17
Installation Instructions for Stacking

Installation Instructions for Stacking

 

Replacement of Lamp

Important

1.Disconnect the power cord from the wall socket before attempting installation.

2.For stacking installation, you must use the “bracket plate” which is enclosed with this unit.

3.The maximum stacking height is two units.

Stacking the two units is limited to the following models.

CAUTION: Be sure the oven cavity is empty.

Installation

1.Stack two units together.

2.Remove 6 screws as shown in the figure.

3.Place the Bracket-plate to join the two units.

4.Attach and tighten 6 screws as shown in the figure here.

5.Ensure the top oven is at a safe and workable height.

Important

1.Remove a screw securing the lamp cover.

You don’t need to remove outer panel to replace lamp.

2.Remove the lamp by rotating it clockwise.

3.Replace with a new lamp by rotating it counter-clockwise.

Lamp

Lamp Holder

Cover

Lamp

Outer(230V 25W)

Panel

GB

Screw

Bracket-Plate

17

Page 17
Image 17
Samsung CM1329, CM1629 Installation Instructions for Stacking, Replacement of Lamp, Cover, Lamp Outer230V 25W Panel