Samsung CN15MSAAN/EDC within the following frequency domain, Appendix, may appear to vibrate

Appendix

Table 5. Troubleshooting problems – Image (Continued )

What you see...	Suggested Action	Reference
Screen is blank and	■ The monitor is using its power	PowerSaver,
power indicator light is	management system.	page 19.
steady amber or blinks	■ Move the computer’s mouse or
every 0.5 or 1 seconds.	press a key on the keyboard.
Image is not stable and	■ Check that the display resolution	Display Mode,
may appear to vibrate.	and frequency from your PC or video	page 17.
	board is an available mode for your	Display Modes,
	monitor. On your computer check:	page 26.
	Control Panel, Display, Settings.
	■ If the setting is not correct, use your	Installing the Video
	computer utility program to change	Driver, page 7.
	the display settings.
	NOTE: Your monitor supports multiscan display functions
	within the following frequency domain:
	■ Horizontal frequency:	30 kHz ~ 61 kHz
	■ Vertical frequency:	50 Hz ~ 75 Hz
	■ Maximum refresh rate:	1024 x 768 @ 75 Hz
Image is not centered	■ Adjust the horizontal and vertical	H-Position, page 14.
on the screen.	position.	V-Position, page 14.
You need the monitor	■ Download the driver from the internet at:
driver software.	http://www.samsung-monitor.com
	http://www.samsungmonitor.com (USA only)

English 21