Using FLOF to Select a Page (depending on the model)
The various topics included in the teletext pages are
1 Display the teletext contents page by pressing the TTX/MIX
( ) button.
2Press the colored button corresponding to the topic that you wish to select;the available topics are given on the status line.
Result: The page is displayed with other colored information that can be selected in the same way.
3 To display the previous or next page, press the corresponding colored button.
4 To display the subpage, see the following steps.
◆ Press the
Result: The available subpages appear.
◆ Select the required
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at leisure.
1Select the LIST mode using the button.
Result: Four
➢The button is used to switch between the LIST and FLOF (or FASTEXT) modes.
2Press the colored button corresponding to the page that will be replaced.
3Enter the new page number using the numeric buttons.
4Repeat steps 2 and 3 for each page to be stored, using a different colored button each time.
5Press the (store) button until the corresponding blocks blink.