Samsung CSN2077DV Connecting Cable TV, Separate VHF and UHF Antennas, Cable without a Cable Box

I N S T A L L AT I O N

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1	▼ Because this TV is cable-ready,
	you do not need a cable box to view
Plug the incoming cable	unscrambled cable channels.
into the VHF/UHF
antenna terminal on back
of the TV.

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT,” “VHF OUT,” or simply, “OUT.”

2.2 CHAPTER TWO: INSTALLATION