O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~2 on previous page.
Press the UP/DOWN▲▼ buttons to select “Channel”, then press the LEFT/RIGHT œ√ buttons.
Menu
Picture
Sound
Channel
Function
Move | Sel. | Exit |
2
Press the UP/DOWN▲▼ buttons to select “Auto Program”.
3
Press the LEFT/RIGHT œ√ buttons.
TV will begin memorizing all of the available chan- nels.
4
After all the available channels are stored, the Auto program menu disap- pears. Press the MENU button to exit.
Channel
TV/AV : TV
ANT/CATV : ANT
Auto Program
Fine tune : 00
Add/Erase
Move | Sel. | Exit |
Auto Program
ANT 11
: Stop
▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the RIGHT √ button at any time to interrupt the memorization process and return to the Channel menu.
CHAPTER THREE: TV OPERATION 3.4