DVD O P E R AT I O N
Setting up the Audio Options
1
Press the MENU button.
2
Press the UP/DOWN▲▼ buttons to select “DVDP Setup”.
Press the LEFT/RIGHT œ√ buttons.
The SETUP MENU is dis- played.
3
Press the UP/DOWN▲▼ buttons to select “Audio Options”, then press the ENTER button.
4
Press the UP/DOWN▲▼ buttons to select the desired item, then press the LEFT/RIGHT œ√ but- tons.
Press the RETURN button to exit.
•Digital output
PCM: Converts to PCM(2CH) 48kHz/16Bit audio. Select PCM when using the Analog Audio Outputs.
Bitstream: Converts to Dolby Digital BITSTREAM - 5.1CH (if
•DTS
On : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS DECODER.
Off : Doesn’t output digital signal.
•Dynamic Compression
On : To select dynamic compression.
Off : To select the standard range.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHAPTER FOUR: DVD OPERATION 5.22