![](/images/new-backgrounds/1287304/28730415x1.webp)
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
◆ Purchase the television
◆ Find that the remote control is no longer operating correctly
1Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:
◆- on the battery against - on the remote control
◆ + on the battery against + on the remote control
3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
Rear of the TV
or
Cable Television
Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
◆A satellite network
1In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television.
2If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear.
For further details, refer to:
◆“Storing Channels Automatically ” on page 13
◆“Storing Channels Manually” on page 15
English - 8