Samsung CW-29M026V manual Edit Name, EXT1 EXT2 AV S-Video

Viewing an External Signal Source/Edit Name (depending on the model)

Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable).

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ENTER () button to select Input.

Result: The options available in the Input group are displayed.

3Press the ENTER () button again to select Source List.

Result: The options available in the Source List group are displayed.

4Press the ▲ or ▼ button to select signal source, then press the ENTER () button.

➢When you connect equipment to the TV, you can choose between the following sets of jacks : EXT1 or EXT2 on the TV’s rear panel, and AV/S-Videoon the TV’s side panel.

➢You can also set these options simply by pressing the

SOURCE ( ) button. If you change the external source while viewing, pictures might take a short period of time to be switched.

Edit Name

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ENTER () button to select Input.

Result: The options available in the Input group are displayed.

3Press the ▲ or ▼ button to select Edit Name. Press the ENTER () button.

Result: The options available in the Edit Name group are displayed.

4Press the ▲ or ▼ button to select external device :

EXT1 - EXT2 - AV - S-Video.

5Select the name by pressing the œ or √ button.

6Set other signal sources (EXT1, EXT2, AV, S-Video) using the same method as listed above.

TV		Input
Source List	: TV	√
Edit Name		√

Move		Enter		Return
TV			Source List
	TV
	EXT1		: ------
	EXT2		: ------
	AV/S-Video		: ------
Move		Enter		Return
TV			Input
	Source List		: TV	√
	Edit Name			√

Move				Enter		Return
TV					Edit Name
	EXT1				œ ------	√
	EXT2		------:
	AV		: ------
	S-Video		: ------
Move		œ √ Adjust				Return
TV					Edit Name
	EXT1				œ DVD	√
	EXT2		------:
	AV		: ------
	S-Video		: ------
Move		œ √ Adjust				Return

English - 35