Samsung CW25M064NRXXEC When adjusting Screen Voltage and White Balance, Factory Adjustment

Alignment and Adjustments

2-7 When adjusting Screen Voltage and White Balance

1.Screen Voltage and White Balance are related each other. Make sure both adjustments are correct.

2.Adjust Screen Voltage before White Balance Adjustments. Make sure Screen Voltage is correct.

3.If White Balance has been readjusted, re-check Screen Voltage.

4.After adjustments are complete, check the following.

-If spots appear on the screen after pressing the Power On/Off key, readjust Screen Voltage.

-If flyback lines appear on the screen, readjust Screen Voltage.

2-8 Factory Adjustment

2-8-1 Service Mode

1.To enter the “Service Mode”, Press the remote-control keys in this sequence :

-If you do not have Factory remote-control

PICTURE OFF INFO ( ) MENU MUTE

PICTURE ON

- If you have Factory remote-control

PICTURE ON
	INFO (	)

FACTORY

Samsung Electronics 2-3