CHECKING THE WATER DISPENSER LINE
1) In order to operate the ice maker properly, water pressure of 1.4 ~10 | is required. |
In this range a 100 cc paper cup can be filled in 10 secs. |
|
2) The water filter removes particles. It does not sterilize or destroy any
3) If the refrigerator is installed in an area with low water pressure (below 1.4 | ), you should install |
a booster pump to compensate. |
|
4)Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dis- penser lever until the water runs from the outlet.
| Water line installation kit is available at extra cost from your dealer. The refrigerator |
NOTE | manufacturer recommends using a water supply kit containing copper tubing. |
|
Checking the Parts
Basic parts
Water Filter | Wrench |
|
Optional parts
Tapping screw 12EA | Clamp 12EA |
Water pipe |
INSTALLATION INSTRUCTIONS
27