1)Remove the brush cover, Grasp the brushroller firmly, and pull it out.
3)Reinsert the brushroller, making sure that both ends of the brushroller are fitted into the grooves of the nozzle head.
2)Remove the flat belt from the motor shaft and the brushroller, Loop the new belt around the motor shaft and then loop it around the brushroller.
4)Be sure that the is not twisted. Rotate the belt 3 or 4 times to position it cor- rectly on the roller and to make sure all rotating parts move smoothly. Replace the brush cover.
4. Cleaning the Brushroller
1)Turn off the vacuum cleaner and unplug the power cord.
2)Remove the cover to expose the brushroller.
3)Cut off any lint, carpet pile or hair that has accumulated around the brushroller with a pair of scissors. Replace the brush cover.
